Each channel houses its own gain and volume controls, allowing for level-matching the volume when switching between the clean and high gain channels. The channel two noise gate’s quick attack suppresses any hiss while ensuring all staccato riffing is articulate and crisp, not choked and choppy. The Boost control allows you to add another 10Db of foot-switchable volume to your tone — perfect for ensuring your solos cut through the mix. The control panel also includes shared EQ (Low, Mid and High), global resonance and presence knobs to adjust the low- and high-end aspects of your tone, and a global reverb control to add the perfect amount of bounce and decay for any room.
Other features include a two-button footswitch, effects loop, dual parallel speaker output jacks, ¼ power switch to reduce wattage—allowing you to crank the amp and still preserve tone but without destroying your neighbor's solitude, and a speaker-emulated DI XLR with power amp mute for accurate all-tube EVH tone for recording direct or using through any PA system.
Sporting sophisticated and distinctive EVH style, the 5150 Iconic Series 40-watt 1x12 combo is wrapped in either Black or Ivory textured vinyl with a black cloth front grille and features silver and black 5150 and EVH logo badges in the upper left and lower right corners. This all-tube combo is finished off with a brushed aluminum top panel, vintage-style chicken-head knobs and molded black plastic top handle. A high-quality fitted cover is available as an EVH Accessory.
SPECS
GENERAL
Model Number: 2257106410
Series: 5150® Iconic®
Color: Ivory
Amplifier Type: Tube
Height: 21" (53.34 cm)
Width: 22.5" (57.15 cm)
Depth: 11.25" (28.57 cm)
Weight: 53 lbs. (24 kg)
ELECTRONICS
Controls: Channel 1: Gain w/ Overdrive Switch; Channel 2 Gain w/ Burn Switch; Noise Gate Channel 2: Low, Mid, High EQ; Channel 1/ Channel 2 Volume, Master Boost, Global Reverb, Resonance, and Presence
Channels: Two - Clean/Overdrive and Lead/Burn
Wattage: 40 Watts
Effects: Reverb
Effects Loop: 1/4" (Send/Return)
Inputs: One - 1/4"
Headphone Jack: None
Line Out: Two - (One XLR and One 1/4")
Speaker Jack: Two - 1/4" Parallel
Rectifier: Solid State
Total Impedance: 4, 8, or 16 ohms
Power Cable: IEC
CONSTRUCTION
Grill Cloth/Material: Black
Amplifier Covering: Ivory Textured Vinyl
Cabinet Material: MDF w/ Plywood Baffle
TUBES
Preamp Tubes: 2 x ECC83S
Power Tubes: 2 x 6L6
SPEAKERS
Speakers: One - 12" EVH® Celestion® Custom
Speaker Wattage: 40 Watts
HARDWARE
Control Knobs: Black Chicken-Head Style Pointer
Handle: Molded Plastic Strap with Black Powder Coated Caps
Front Panel: Brushed Aluminum
Effects: Reverb
MISCELLANEOUS
Other Features: 1/4 Power Level Switch
ACCESSORIES
Footswitch: 2-Button Footswitch Included
Footswitch Connection Type: 1/4"