Iconic high-gain distortion pedal
Innovative dual-stage gain circuit produces thick and tight distortion sounds with smooth, singing sustain
Three-band active EQ with semi-parametric midrange provides intense sound customization with up to 15 dB boost/cut on each band
Easy to achieve massive, satisfying sounds at any volume level
BOSS five-year warranty
Step into the Metal Zone
The MT-2 is BOSS’s second most popular drive pedal ever, after the DS-1 Distortion. A key to its enduring success is the ability to achieve dense, heavy crunch and singing sustain at any volume, providing an instantly inspiring experience for players at every skill level. And thanks to its smooth character and active EQ with semi-parametric midrange, the MT-2 works well with all types of guitar amplifiers, including clean “pedal platform” amps.
Innovative Dual-Stage Gain Circuit
Under the hood, the MT-2 employs an innovative analog circuit design to realize its rich, heavy voice. Two gain stages are configured in series, with the first stage providing mid-focused clarity that feeds the second stage’s more aggressive character. Carefully tuned pre- and post-distortion filtering (seven total stages) ensures that the tone is tight and well-defined at every setting, with no mud or flub whatsoever.
Shapeshifter
The MT-2’s advanced tone shaping goes far beyond the capabilities of most analog drive pedals, letting you dial in everything from chugging, mid-scooped rhythm mayhem to bold, cutting sounds that poke through the densest mixes. Post-distortion Low, Middle, and High knobs offer +15 dB cut or boost to perfectly match your guitar and amp type or craft entirely new tones. The midrange is the heart of every guitar’s voice, and the MT-2 provides a variable control to set the frequency in this critical band anywhere from 200 Hz to 5 kHz.
| SPECIFICATIONS |
| Nominal Input Level |
-20 dBu |
| Input Impedance |
1 M ohm |
| Nominal Output Level |
-20 dBu |
| Output Impedance |
1 k ohm |
| Recommended Load Impedance |
10 k ohms or greater |
| Controls |
DEPTH knob RATE knob WAVE knob Pedal switch |
| Indicator |
CHECK indicator (Used for indication of check battery) |
| Connectors |
INPUT jack: 1/4-inch phone type OUTPUT jack: 1/4-inch phone type DC IN jack |
| Power Supply |
Carbon-zinc battery (9 V, 6F22) or Alkaline battery (9 V, 6LR61) AC adaptor (PSA series: sold separately) |
| Current Draw |
25 mA |
| Expected battery life under continuous use |
Carbon: Approx. 12 hours Alkaline: Approx. 28 hours *These figures will vary depending on the actual conditions of use. |
| Accessories |
Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information") Carbon-zinc battery (9 V, 6F22) |
| Options (sold separately) |
AC adaptor: PSA series |
| Bypass |
Buffered bypass |
| SIZE AND WEIGHT |
| Width |
73 mm 2-7/8 inches |
| Depth |
129 mm 5-1/8 inches |
| Height |
59 mm 2-3/8 inches |
| Weight (including battery) |
385 g 14 oz |